| |
Manual Mould |
Semi Automatic Machine |
1 |
We have specialize ourselves in moulds only |
We do not manufacture / deal in Semi Automatic Machine. This is given for reference only |
|
|
|
|
Cavities [ Say for app. for 10 mm diameter ] |
1 |
50 Cavity mould could be made |
Capacity 250 TO 300 cavity |
|
|
|
|
Cost |
1 |
App. Rs. 2900/- [for local India] Best Quality
|
App. Rs. 50,000/- Best Quality |
2 |
App. $ 125.00 [for exports] |
App. $ 1500/- |
3 |
Only one fix size candle can be made in mould. One Fix Diameter & Height |
One Fix Diameter candle can be made – one can adjust the length in the candle but diameter would be fix |
4 |
Our Best Quality Mirror Finished mould gives nearly the same Finishing as in the Semi Automatic Machine |
- |
|
|
|
|
Size Space required [consumed] |
1 |
Generally no [less] space required as mould size in Inch Is approximately L x B x H 12” x 2” x 10” Can be operated in Home |
More space required as machine size in inch is approximate L x B x H 48” x 36” x 48” and special premises is must |
2 |
Can be operated from home even in kitchen |
Industrial Premises is Must |
|
|
|
|
Labour / Operator |
1 |
Unskilled Labour can easily operate mould. Even Ladies, small child or Disable person to some extent can also make candles with mould |
Skilled labour is MUST or Compulsory |
2 |
No Maintenance / Maintance |
Wear and tear. Maintance is must for Mechanical parts Like oiling, greasing, cleaning |
|
|
|
|
Production |
1 |
Production cycle time 15 to 20 minutes and if your Mould has 50 cavity, you can prepare 1600 candles With that mould in 8 hours approximately |
Production cycle is 15 - 20 minutes and your machine cavities are 300, production capacity will be app. 9,000 – 10,000 candle i.e. 6 to 7 time depend upon skilled labour + helper |
2 |
No helper required. Single person can work on various moulds to make varieties of products Such as plain, designer and floating |
One operator and one helper can make only one variety Plain candle only on one machine at a time |
|
|
|
|
Dispatch |
1 |
Mould weight 7 to 10 kg in case of Plain candle 1 to 2 kg for designer / floating candle mould or even less weight depend upon design and Cavities. Packing extra. Silicon Rubber Mould weights app. 50 – 150 gms only |
Machine weight 300 to 350 kg. Packing extra |
2 |
For INDIA - Mould being light weight could be easily send by Post Parcel or Courier |
For INDIA - It has to be send through Transport |
3 |
For Exports [ outside India ] –
Easy cost efficient shipping could be done easily. To send by Air Post Parcel / Courier at your door step which after dispatch reaches at your place at 7 – 12 days
Less Government Formalities & less paperwork |
For Exports [ outside India ] –
Being Heavy could not be send by Post Parcel, hence to be send by Seaways or Airway. One has to consider that cost also
Few Government Formalities and more nos. of paper work |
4 |
Best for new comer |
Once you are set in business – experienced for couple of years & have much sales which could not be fulfilled by moulds then only machine is advisable. |
5 |
Compare to machine, it could be started in hardly 5 – 10 % investment as required for Semi Automatic Machine |
It requires huge investment. As it gives very Huge Production you also need huge investment for Wax & other accessories
Firstly one should be practically able to sell such a huge candle then only one must try for machine otherwise you have to keep the machine idle which would indirectly be waste of your resource – labour, rent, investment |
